Red Line

1,000.00

Description

• 5gram Packing

• Gun Tip size : 2.0MM
• solid solvent & UV Resistant
• Temp resist to 350F

check your Spray gun tip size correctly , For best results, mix Flakes into Pearl binder. Some users mix Flakes into top coat clear, however this adds a level of difficulty to the application and we recommend using Pearl Binder. there is no mixing ratios ,can be used for your purpose

Category:
Tips

Gravity guns and siphon guns (with filters removed) work well. Hand agitation/swirling the gun between panels is helpful to keep flakes suspended in the gun’s hopper.

For strong flake coverage in each coat you may need to increase tip size

Filter clear/reducer before mixing flake. Once flake is mixed in, you cannot filter or it will get trapped.

After mixing, pour mixture into the cup of your gun, but DO NOT use a filter. Also, please remember your gun’s filter must be removed before pouring.

Gun should not be too far from the surface, 4-5 inches is ideal. Spray 1-3 coats. Try not to apply more than three flake coats because this increases roughness, which can lengthen the smoothing/sanding process, allow time to fully flash (follow coating manufacturer’s recommendation). Once flashed, use a scuff pad (NOT sandpaper, tac cloth, then proceed with additional flake coats.

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In
Shopping Cart
0
Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products